Ballards Oversized Footpeg Repair Pins With Drill Bit

BALLARDS OVERSIZE FOOTPEG PINS

Finally, theres a great way to restore the new bike feeling back into your old steed with the stainless steel oversized pin kits. After countless hours of measuring and testing on a multitude of bikes, Ballards have come up with this 10.5mm oversize adjustable pin length design that will repair your worn pegs and frame or frame/mounts. 

Simply use a 10.5mm drill (available from us or most tool/hardware shops and drill out the frame/mounts and your old worn footpeg. Its that simple.

They will work on most Euro/Jap Enduro/Moto/Trail bikes that have the common 10mm pins, and the overall pin length is from 49mm down to about 42mm long. For shorter 10mm pins it may just mean that there will be a bit of an excess of pin length sitting down under and where the split pins sit, but that can be no real drama as well (some Trail bikes like the early XRs have 8mm pins so this kit will sadly not work with just a few bikes)

So if your old steed has the common stock 10mm pin size, then these could be your new best friend. 

Get measuring and bring back that new bike feel!

• Includes: Footpeg pins & Drill bit 

Browse more

• Browse all Ballards
• Browse all Ballards Footpegs & Accessories
• Browse all Footpegs